MAN
>
LENGTH
Pressing MAN key the
PPRREESSEETT MMAANNUUAALL
function is activa-
ted (Fig.3)
The activation of the function has signalled from the red
light to side of the same key.
This function allows to modify manually each output single channel
USE OF MASTER FADER:
The
MMAASSTTEERR
fader checks the general level of the output channels.
KKeeeepp tthhee MMAASSTTEERR ffaaddeerr ttoo tthhee mmaaxxiimmuumm..
Keep the
PPRREESSEETT AA
fader to the maximum
..
(100%) and the
PPRREESSEETT BB
fader to the zero value, through the
PPRREESSEETT AA
fader you can control the
general level of the preset
AA
.
The 24 upper fader control the single intensity
of the channels of the
preset
AA
.
Keep the
PPRREESSEETT AA
fader to zero value
..
and the
PPRREESSEETT BB
fader to the
maximum
..
(100%), through the
PPRREESSEETT BB
fader you can control the gener-
al level of the preset
BB..
The 24 upper fader control the single intensity of the
channels of the
preset
BB
.
Through the two
AA
and
BB
PRESET faders is possible to mix between them
the channels of the preset
AA
with those of the preset
BB..
In
WWIIDDEE
operation (48 channels) the up faders control the 1/24 channels,
and the down faders control the 25/48 channels.
The
PPRREESSEETT AA
fader control the general level of the 48 channels of the
AA++BB
presets.
The output monitor show one of the two banks (24 channels each one);
PPRREESSEETT AA
key = 1/24 channels;
PPRREESSEETT BB
key = 25/48 channels.
Fig. 3
3.3 MAN operation
GB
USE OF FLASH KEYS:
The 24
keys
that are under down
faders keep the output
1/24
channel to the
maximum value (100%).
II
n
WWIIDDEE
operation the
FFLLAASSHH
keys correspond to the output monitor;
PPRREESSEETT AA
key = 1/24 channels;
PPRREESSEETT BB
key = 25/48 channels.