VIDEO MODE (CONTD.)
Video Menu
The Video Menu is accessed by pressing the MENU button whilst in video mode.
The default settings have been carefully selected to allow you to use the iN-CAR CAM without the
need to change any settings. However, should you wish to change a setting then please see below.
Use the up and down buttons to highlight the function that you'd like to change and press the OK
button to enter the settings sub-menu.
Once in the submenu, use the up and down buttons to highlight the required setting and then press
OK to confirm your selection and return to the Video Menu.
Press the MENU button twice to return to video mode.
Note:
- Menus are not accessible whilst the iN-CAR CAM is recording.
1. Resolution
Select recording resolution, this will increase or decrease the quality of the recorded video.
Options: 1080P, 720P and 720P 60FPS
Default Setting: 1080P
2. Exposure
Adjust exposure level for different light conditions.
Options: +2, +1, 0, -1 and -2
Default Setting: 0
3. Audio Recording
Turn On / Off the microphone.
Options: On and Off
Default Setting: On
4. Number Plate
Enter the registration number for your vehicle, this will then be shown on the video file.
Video Menu
Resolution
Exposure
Audio Recording
Video Length
Back
MENU
Enter
OK
Video Menu
Resolution
Exposure
Audio Recording
Number Plate
19
To Next Page
Loading...
Need help?
General
