Once opened the 'Startup Screen' will be shown, from which there are two options available -
Continue and Settings.
Continue
This option is used when you wish to use Cam Viewer to manage files that have already
been downloaded from the iN-CAR CAM to your phone.
Settings
This option is used when you wish to connect your phone to the iN-CAR CAM.
Press the 'Settings' button on the 'Startup Screen', this will open the WiFi options on your phone.
The Dash Cam will be shown as 'NEXTBASE 312GW xxx', enter the password (12345678).
Once connected successfully the ‘Device connected’ popup message will appear on the
iN-CAR CAM screen.
Note:
- Should the iN-CAR CAM not be available within the available networks shown on your phone
please restart the iN-CAR CAM and then turn on the WiFi function again.
35
Continue Settings
Unable to connect to iN-CAR CAM
Open Settings to connect to
iN-CAR CAM using WiFi
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.)
To Next Page
Loading...
Need help?
General
