NextBase 322GW User Manual

37
Firmware Update Information
How to Check your Dash Cam’s current Firmware Version
Within the Setup Menu, on page 4, select ‘System Info’. Here you will find information relating to your
Dash Cam, including what firmware version is currently active (i.e R05.3)
Ways to Update Firmware on your Dash Cam
There are a number of ways for you to update your firmware version.
- Connect your Dash Cam’s SD Card to PC or Mac using a card reader. This will open a file explorer drive,
and show the contents of your SD Card. Go to the ‘Support & Downloads’ page
on nextbase.com and download the newest firmware version (i.e R05.4); this will download as a .bin file.
Drag and drop the .bin file to the SD Card.
Eject the SD Card and insert it back into your Dash Cam. When power is supplied to your Dash Cam it
will turn on, and will automatically begin updating. While updating, the red LED to the left of the screen
will start flashing. Once the update has been completed your Dash Cam will automatically restart.
- If you have a PC, You can also update your Dash Cam using the ‘Update Dash Cam’ function on
MyNextbase Player™. This function will NOT work on a Mac. Connect your Dash Cam to PC via USB,
select ‘Firmware Update’ and open up MyNextbase Player™ (available to download for free from
nextbase.com). Select ‘Update Dash Cam’. A pop-up will appear on your PC describing your current
firmware, and the latest version available. When you select ‘Update’, your Dash Cam will automatically
begin updating. While the Dash Cam is updating, the red LED will flash. Once the update has been
completed your Dash Cam will automatically restart. Please note that an internet connection is
required for the Dash Cam to be updated.
If ‘Keep User Settings’ is turned ON in the Setup Menu, your Dash Cam will boot up normally,Notes:
straight into video live view mode, ready to use. If ‘Keep User Settings’ is turned OFF, after the update
is complete, the Dash Cam will boot up into the First Time Use menu, which must be completed before
the Dash Cam can be used. Files saved on the SD card will not be affected by the firmware update.
Firmware controls the basic functioning of the Dash Cam.
If your Dash Cam is not functioning correctly, you may
need to update your firmware.
Firmware updates may also be released to fix bugs, and
improve the general functionality of the Dash Cam.
In short, it’s important to keep the firmware on your
Dash Cam up to date so it can operate to it’s full capacity.
37

NextBase 322GW Specifications

General

Night vision	Yes
Product color	Black, Silver
Country of origin	China
Languages support	DEU, DUT, ENG, ESP, FRE, ITA, NOR
Number of cameras	1
Maximum frame rate	60 fps
Power cable length	4 m
Collision detection	No
Aperture range (F-F)	1.6 - 1.6
Main camera resolution	1920 x 1080 pixels
Main camera viewing angle	140 °
Video compression formats	MP4
Main camera sensor resolution	2.12 MP
Battery life	15 min
Battery weight	6 g
Output current	2 A
Output voltage	3.7 V
Battery capacity	320 mAh
Operating voltage	12 V
Power source type	Battery, Cigar lighter
Input operation voltage (max)	24 V
Storage temperature (T-T)	-20 - 45 °C
Display diagonal	2.5 \
Display resolution (numeric)	311 pixels
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Quantity per pack	7 pc(s)
Accessories included	Vdc Car Power Cable, Cable Tidy Tool, Click & Go Powered Mounts: Adhesive
Package type	Box
Package width	85 mm
Package height	45 mm
Package weight	410 g
Quantity per pallet	720 pc(s)
Master (outer) case width	280 mm
Master (outer) case height	370 mm
Master (outer) case length	330 mm
Master (outer) case weight	1025 g
Customs product code (TARIC)	8525890000
Master (outer) case GTIN (EAN/UPC)	5060384255675
Export Control Classification Number (ECCN)	EAR99
Number of shipping (inner) cases per master (outer) case	20 pc(s)

Weight and Dimensions

Depth	47 mm
Width	82 mm
Height	46 mm
Weight	82 g