Rear Camera
STEP 5
Route Rear Camera cable to the rear of the vehicle.
Clean the Rear window. Wipe with alcohol rub,
wipe clear with cloth, then leave to dry for 5 minutes.
Choose a position for the
Rear Camera at the top of
the rear window, leaving
enough loose cable to
allow boot to be opened.
16
iQ
Rear
Window
Position and align the iQ using
the Live View on the iQ App as
you did for the Front Camera.
Remove adhesive cover from the mount and firmly press
mount onto Rear Window. Hold for 10 seconds to ensure
maximum adhesion. Adjust the angle of the camera if
required using the Live View.
SET UP