Setup Menu
Screen Saver
Device Sounds
Announcements
Auto Power Off
Back
MENU
Enter
OK
System Info
Continued from previous page.
9. Screen Saver
Turn on the Screen Saver function to shut down the screen after 30 seconds of button
inactivity, press any button to re-activate the display.
Note:
- If the Speed Display function has been turned on, then Screen Saver will not be
available.
Options: On and Off
Default Setting: Off
10. Device Sounds
Turn Off / On the beep sound which is heard when a button is pressed and also mute
the startup and shutdown chimes.
Options: On and Off
Default Setting: On
11. Announcements
Turn Off / On the spoken Announcements.
The spoken announcements provide an audible confirmation of the button that has been
pressed and its function. The announcements also serve as positive confirmation after a
file has been protected due to G-Sensor activation during recording.
Options: On and Off
Default Setting: Off
Note:
- Announcements are currently only available in English.
- Turning on Announcements will turn off the Device Sounds.
SETUP MENU (CONTD.)
31
To Next Page
Loading...
Need help?
General
