Setup Menu
Auto Power Off
System Info
Keep User Settings
Back
MENU
Enter
OK
SETUP MENU (CONTD.)
Continued from previous page.
12. Auto Power Off
Adjust the timing of the Auto Power Off function, this can be used to continue recording
in event of loss of power within the vehicle.
Options: 10 Seconds, 1 Minute and 2 Minutes
Default Setting: 10 Seconds
13. System Info
This covers multiple screens (pages), press OK to scroll down as required.
The model number and installed Firmware version of your Dash Cam is displayed here.
FCC-ID is shown here under the E-Label Act (USA).
SD Card Information is provided for the installed SD card within the Dash Cam
Wi-Fi Information is provided for the Dash Cam. The SSID (network name), Password and
MAC address.
14. Keep User Settings
Turn this to ON in order to keep your individual user settings during the Dash Cam Update
process.
Select OFF in order to clear all user settings and return them to defaults, during the Update
process.
Options: On and Off
Default Setting: Off
15. Default Settings
Reset the Dash Cam to the default settings.
32
Default Settings
To Next Page
Loading...
Need help?
General
