12
CELLULAR SETTING INFORMATION
Cellular Modem: ON/ OFF
This setting allows you to turn the cellular function of the camera on or off.
Leave the setting in the “ON” setting to enable cellular communication.
When in the “OFF”, no photos will be sent on your cellular data plan
Connection Status: This menu displays the LET connection condition, IMEl and
cellular signal strength. (IMEl: This number is used to reference your physical
camera)
Status QR Code: This menu displays the QR code for help you associate this
camera with your APP account.
Upload Frequency : This setting allows you to decide the photo or video resolution
for upload.
Once Per Day: Camera will upload photos once per day, based on upload time. This
is the most efficient option.
Twice Per Day: Camera will upload twice per day, based on upload time.
Hourly: Camera will upload photos every hour.
Instant Group: SIMilar to instant, if motion is detected within 10sec. Of original
photo, camera will continue to take photos until motion ceases before uploading.
Instant: As soon as your sensor detects motion it will take a photo and upload.
Upload Photo Resolution
Large 1280 x 720, Middle 640 x 360 and Small 480 × 270
Upload Video Resolution
Large: 848 × 480,Middle: 640 x 352 and Small: 320 × 176
Time Zone: This setting allows you to set your camera to different time zones.
SETTING INFORMATION
Date & Time: Sets the year, month, and date.
Time Format: 12hr and 24hr format.
Camera Name
Allows you to enter a name for your camera that will appear on the image time
stamp. Press the OK button to choose “input” and go to the name input screen. If
necessary, select the arrow in the upper right of the keyboard to erase the current
NOTE: This setting has a large effect on your Data and Battery usage.
NOTE: When you in the photo and photo +video mode, the menu only shows the
photo resolution, and in the video mode, the video resolution would be show in the
menu.
To Next Page
Loading...
