The NexTraq VT-2200 is a robust and versatile vehicle tracking device designed for fleet management, offering enhanced tracking and navigation capabilities. It is housed in a durable nylon plastic engineered enclosure, making it waterproof and dustproof, and suitable for placement near or on heat-generating sources. The device is designed for easy installation and comes with a modular cellular GPS antenna.
Function Description
The VT-2200 serves as a comprehensive fleet tracking solution, providing real-time location data, vehicle status, and other critical information. It integrates GPS and GSM technologies to ensure reliable communication and accurate positioning. The device is designed to be installed in a vehicle's cab and is powered by an external power supply, typically the vehicle's power (8-24 volts).
Key functions include:
- GPS Tracking: Provides precise location data for vehicles, enabling fleet managers to monitor vehicle movements and optimize routes.
- Data Communication: Transmits vehicle data to the NexTraq platform, allowing for remote monitoring and analysis.
- Ignition Monitoring: Detects when the vehicle's ignition is on or off, providing insights into vehicle usage and operational hours.
- Power Management: Operates on the vehicle's power supply and includes features for managing power consumption, such as hibernate mode.
- Input/Output (I/O) Capabilities: Features digital inputs and outputs for connecting to various vehicle systems and accessories, such as positive and negative triggered inputs, and relay driver outputs.
Important Technical Specifications
The VT-2200 boasts a range of specifications that highlight its performance and reliability:
Mechanical:
- Enclosure: UV Stabilized ABS Plastic
- Weight: 158.75g (5.6 oz)
- Dimensions: 28mm x 86mm x 153mm (1.09 in x 3.37 in x 6.0 in)
- Connectors: Automotive Grade FAKRA connectors
Electrical:
- Power Supply Voltage: 8V – 24V DC (3.5V – 4.5V DC in hibernate mode)
- Consumption:
- Normal: 35-60mA
- Idle: 15-20 mA
- Hibernate: > 1mA
- Power Harness: 4-pin connector for simple installation, preconfigured for battery, ground, and ignition.
GSM/GPS Modem:
- GSM Modem: Quad-band GSM modem for maximum network compatibility.
- Frequency Bands: 850/900/1800/1900 MHz
- Data Methods: Class 12 max GPRS (UDP), SMS
GPS Receiver:
- GPS Technology: Latest GPS technology to ensure most reliable and accurate position, velocity, and time information.
- Tracking Sensitivity: -159 to -160 dBm
- Acquisition Time:
- -3 s Hot Start
- -30 s Warm Start
- -35 s Cold Start
- Position Accuracy: <2.5m CEP
- Full Serial Port: 1 dedicated full serial port for future use.
Data Communication Interfaces:
- Serial Ports:
- 1 dedicated serial port with GPS NMEA output for in vehicle navigation.
- 1 dedicated serial port for personal navigation device connectivity.
- 1 full serial interface for future use.
- Digital Inputs: 2 negative triggered, 1 positive triggered
- Digital Outputs: 2 relay driver (100 mA)
Accessories:
- GPS/GPRS Combo Blade Antenna: 2m (6.5ft) with automotive grade FAKRA connectors.
- Wire Power Adapter: (battery, ground, ignition)
- Data Interface Adapter Cables
Environmental:
- Operating Temperature: -32°C to +85°C
- Storage Temperature: -32°C to +85°C
Certifications & Classifications:
- Industry: PTCRB, GCF
- Government: FCC, E-Mark
Usage Features
The VT-2200 is designed for straightforward installation and operation:
- Installation Flexibility: The device can be secured to the chassis of the vehicle using external mounting tabs. It is recommended to place the unit in a location that will not interfere with the safety of vehicle operation, such as under the dashboard, behind the radio, or under the passenger side.
- Antenna Mounting: The combination antenna (cellular and GPS) can be mounted on glass, on the dashboard, or as a covert installation. For glass mounts, the antenna should have a clear view of at least 40 percent of the sky and be oriented with the top section facing the sky. For covert installations, it can be mounted on non-metallic materials such as plastic, fiberboard, or fiberglass, ensuring the top part of the antenna faces the sky. The minimum distance between other transmission antennas should be at least 18 inches.
- Wiring: The VT-2200 uses a 4-pin Molex connector for power, ground, and ignition leads. A 5-amp fuse is inline with the power and ignition lead for protection. It is crucial to verify that the power source is constant 12V+ and the ignition wire is 12V+ when the ignition is in the "ON" position.
- Post-Installation Testing: After installation, verify the unit's operational status by checking the solid blue lights on the face of the VT-2200 (PWR, GPS, and COM). The radio LED will flicker while transmitting. Login to the NexTraq application to verify the unit is operational and displayed, and check the recent history in NexTraq.
- Troubleshooting: The installation guide provides detailed troubleshooting steps for common issues, such as the unit not powering up, vehicle not appearing in NexTraq Web application, COM light not on or blinks, and ignition light not on when vehicle is switched on.
Maintenance Features
While the manual primarily focuses on installation, some aspects relate to maintenance and longevity:
- Durable Design: The waterproof and dustproof enclosure protects the internal components from environmental factors, reducing the need for frequent maintenance due to wear and tear.
- Fuse Protection: The inline 5-amp fuse on the power and ignition leads protects the device from power surges, preventing damage to the unit.
- Antenna Care: Proper installation and placement of the antenna are crucial for optimal performance. Ensuring the antenna has a clear view of the sky and is not obstructed by metallic sunscreens or pinched cables helps maintain signal integrity.
- Wiring Integrity: The use of automotive-grade connectors and proper wiring techniques (e.g., solid metal surface for ground, crimping and securing connections) ensures a reliable electrical connection, minimizing potential issues.
- Regular Checks: The post-installation testing steps, such as checking the LED indicators and verifying operation through the NexTraq application, serve as initial maintenance checks to ensure the device is functioning correctly.
- Customer Support: NexTraq provides customer support for any questions regarding wiring colors or other installation and operational queries, which is a key maintenance resource.
Need help?
General
To Next Page