NexTraq VT-2200 - VT-2200 Location

To Next Page

To Previous Page

VT-2200 Location

VT-2200 placement is dependent on several factors:

• The type of vehicle

• The placement of the antennas

• The availability of a constant 12-volt power supply

In most vehicles, the VT-2200 can be placed inside or underneath the

dashboard. The vehicle’s radio can be removed and the unit placed

behind the radio. A kick plate can be removed and the unit can be

safely secured to a firewall or zip-tied onto a permanent fixture. VT-

2200 can be secured underneath the dashboard on ether the driver or

passenger side, in any location that will not interfere with the

safety of vehicle operation. The device can be secured by the

individual tie-wraps or by self-taping screws or Velcro tape.

Fig. 7 – VT- 2200 Location

Avoid placing VT-2200 near moving parts, or next to any vehicle

pedals. Always consider the placement of antennas and be sure the

cables can reach the desired location of the mobile. Permanently mount

the VT-2200.