4
Introduction
Following the purchase of VT-2200, there will be several factors to
consider prior to its installation, including placement of the VT-2200
hardware and the selection and placement of the antenna(s). This
installation guide is designed to provide instructions for the
installation of the VT-2200 hardware for use with the NexTraq™ Fleet
Tracking platform.
This document is designed for new and experienced installers and their
managers to help overcome any questions associated with VT-2200
installations.
This installation guide covers the following:
• Equipment and Tools
• Types of Antenna Mounts
• Placement of VT-2200
• Installations
• Troubleshooting
VT-2200 Hardware
The VT-2200 consists of a nylon plastic engineered housing containing
the electronic components. Additional equipment includes a separate
power connection cable and a modular cellular GPS antenna.
Specifications for the VT2200 can be found in Appendix A.
VT-2200 is powered by an external power supply; vehicle power (8-24
volts). The device is designed to be installed in the vehicle’s cab.
The unit is not waterproof or dustproof, nor is it designed to be
placed near or on heat-generating sources (ex: in the engine
compartment, attached to the heater).
To Next Page
Loading...