Nexus NX2 Compass - NX2 Compass Calibration and Setup

English COMPASS
5-22
When using the Compass Data in a Network with more then 3
transducers, we recommend you to use the NX2 Server. One
Nexus Network power/data cable is used to connect all instruments.
You will have NMEA 0183 in/out. Depth information will (if used) be
repeated at more than one NX2 instrument.
Network bonus function:
When you are using the race timer on the Multi or Log instrument, a
graphical countdown timer will pop up the last 60 seconds.
In this example there is 45 seconds to the start.