NF WF1943B - Page 65

4.2 Sweep
WF1943B 4-17
(4) Set START frequency
① Use the
and keys to produce the following display (START flashes).
１０００．００００００００ Ｈｚ
Ｆ－ＳＷＰ：
3
ＦＵＮＣＴＩＯＮ ＳＴＡＲＴ ＳＴＯＰ
4
② Press
ENTER
key.
③ Set the start frequency with the keypad or
MODIFY
dial.
For example, set to 100 Hz.
④ After setting, press the
EXIT
key once to release the start frequency setting mode.
(5) Set STOP frequency
① Use the
and keys to produce the following display (STOP flashes).
１００００．００００００００ Ｈｚ
Ｆ－ＳＷＰ：
3
ＦＵＮＣＴＩＯＮ ＳＴＡＲＴ ＳＴＯＰ
4
② Press
ENTER
key.
③ Set the stop frequency with the keypad or
MODIFY
dial.
For example, set to 1000 Hz.
④ After setting, press the
EXIT
key once to release the stop frequency setting mode.