© National Instruments Corp. 3 NI 9795 User Guide and Specifications
you can use a separate host PC running Windows, or a PAC running
NI LabVIEW Real-Time, to display measurement results, status
information, and to change the NI WSN gateway and
NI WSN-32xx node settings.
Safety Guidelines
Operate the NI 9795 only as described in these operating
instructions.
Hot Surface This icon denotes that the component may be
hot. Touching this component may result in bodily injury.
Caution Do not operate the NI WSN product in a manner
not specified in the user manual or operating instructions.
Product misuse can result in a hazard. You can
compromise the safety protection built into the product if
the product is damaged in any way. If the product is
damaged, return it to National Instruments for repair.
Caution If you need to clean a NI WSN product, wipe it
with a dry towel. The product must be completely dry and
free from contaminants before you return it to service.
To Next Page
Loading...
Need help?
General
