NI DAQ X Series User Manual

© National Instruments | 6-25
X Series User Manual
Getting Started with DIO Applications in
Software
You can use the X Series device in the following digital I/O applications:
• Static digital input
• Static digital output
• Digital waveform generation
• Digital waveform acquisition
• DI change detection
Note For more information about programming digital I/O applications and
triggers in software, refer to the NI-DAQmx Help or the LabVIEW Help.
X Series devices use the NI-DAQmx driver. NI-DAQmx includes a collection of programming
examples to help you get started developing an application. You can modify example code and
save it in an application. You can use examples to develop a new application or add example
code to an existing application.
To locate LabVIEW, LabWindows/CVI, Measurement Studio, Visual Basic, and ANSI C
examples, refer to the document, Where Are NI-DAQmx Examples Installed in Windows?, by
going to
ni.com/info and entering the Info Code daqmxexp.
For additional examples, refer to ni.com/examples.

NI DAQ X Series Specifications

General

Brand	NI
Model	DAQ X Series
Category	Data Loggers
Language	English