3 Disturbances in comfort
Troubleshooting
NOTE
Work behind covers secured by screws may only be carried out by, or
under the supervision of, a qualified installation engineer.
NOTE
AMS 10 communicates all alarms to the indoor module/control module
(VVM / SMO).
Basic actions
■
Make sure that the air flow to AMS 10 is not blocked by foreign objects.
■
Check that AMS 10 does not have any external damage.
Ice build-up in the fan, grille and/or fan cone on AMS 10
Contact your installer!
Large amount of water below AMS 10
Check that the water drainage via the condensation pipe (KVR 10) is
working.
AMS 10Chapter 3 | Disturbances in comfort18
To Next Page
Loading...
