SYMBOLS IN THE DISPLAY
The following symbols may appear on the display during
operation.
DescriptionSymbol
This symbol is displayed when the compressor is
operating.
This symbol is displayed when the additional heat
is operating.
This symbol appears when the speed of the fan is
changed from its normal setting.
This symbol appears when lux mode for hot water
is activated or when periodic increase is active.
This symbol appears when "scheduling" is activated
in menu 2.3.
This symbol appears when "holiday setting" is ac-
tivated in menu 4.7.
OPERATION
To move the cursor, press the up or down button. The
marked position is brighter and/or has a turned up tab.
SELECTING MENU
To advance in the menu system select a sub-menu by
marking it by using the up and down buttons and then
pressing the OK button.
SELECTING OPTIONS
auto
add. heat only
op. mode 4.2
In an options menu the current selected option is indicated
by a green tick.
To select another option:
Mark the applicable option using the up or down button.
One of the options is pre-selected (white).
1.
Press the OK button to confirm the selected option.
The selected option has a green tick.
2.
SETTING A VALUE
periodic increase 2.9.1
activated
period days
Next increase
Adjustable value
2023-06-08
To set a value:
Mark the value you want to set using the up or
down button.
1.
Press the OK button. The background of the value
becomes green, which means that you have ac-
cessed the setting mode.
2.
Press the up button to increase the value or the
down button to reduce the value.
3.
Press the OK button to confirm the value you have
set. To undo and return to the original value, press
the back button.
4.
SCROLL THROUGH THE WINDOWS
A menu can consist of several windows. Mark the page
number, using the up and down keys, in the upper left corner
and then press the OK button to switch between the win-
dows.
Current menu
window
Number of
windows in the
menu
Scroll through the windows in the start guide
Arrows to scroll through windows in the start guide
start guide 5.7
time & date
1. Mark, using the up and down keys, one of the arrows in
the top left corner (at the page number).
2. Press the OK button to scroll between the windows in
the start guide.
NIBE F110Chapter 7 | Control - Introduction24
To Next Page
Loading...
