Nibe F110 - Configuring Hot Water Capacity

Set the hot water capacity
Overview
Sub-menus
WHPSRUDU\ OX[
+27 :$7(5 
FRPIRUW PRGH
VFKHGXOLQJ
DGYDQFHG
DFWLYH
HFRQRP\
RII
For the menu HOT WATER there are
several sub-menus. Status information
for the relevant menu can be found
on the display to the right of the
menus.
temporary lux Activation of tempor-
ary increase in the hot water temper-
ature. Status information displays
“off" or what length of time of the
temporary temperature increase re-
mains.
comfort mode Setting hot water comfort. The status information displays
what mode is selected, "economy", "normal" or "luxury".
scheduling Scheduling hot water comfort. Status information "active"
displays if the scheduling is active right now, the status information "set"
displays if the scheduling is set but not active.
advanced Setting periodic increase in the hot water temperature.
temporary lux
RII
WHPSRUDU\ OX[ 
 KUV
 KUV
 KUV
Setting range: 3, 6 and 12 hours
and mode "off"
Default value: "off"
Menu
2.1
When hot water requirement has temporarily increased this menu can be
used to select an increase in the hot water temperature to lux mode for
a selectable time.
21NIBE™ F110Chapter 3 | F110 – at your service