choose another file
XSGDWH ILUPZDUH
Select “choose another file" if you do not want to use
the suggested software. When you scroll through the
files, information about the marked software is shown
in a fact box just as before. When you have selected a
file with the OK button you will return to the previous
page (menu 7.1) where you can choose to start the up-
date.
Menu 7.2 - logging
ORJJLQJ
DFWLYDWHG
LQWHUYDO
VHF
Setting range: 1 s – 60 min
Default setting range: 5 s
Set whether the present measurement values from F1145
are to be saved in a log on the USB memory.
Log for longer periods
1.
Set the desired interval between loggings.
2.
Tick “activated".
3.
Mark “read log settings" and press the OK button.
4.
The present values from F1145 are saved in a file in
the USB memory at the set interval until “activated"
is unticked.
Caution
Untick "activated" before removing the USB
memory.
Menu 7.3 - manage settings
PDQDJH VHWWLQJV
VDYH VHWWLQJV
UHFRYHU VHWWLQJV
Here you can manage (save as or retrieve from) all the
menu settings (user and service menus) in F1145 with a
USB memory.
Via "save settings" you save the menu settings to the
USB memory in order to restore them later or to copy the
settings to another F1145.
NOTE
When you save the menu settings to the USB
memory you replace any previously saved set-
tings on the USB memory.
Via "recover settings" you reset all menu settings from
the USB memory.
NOTE
Reset of the menu settings from the USB
memory cannot be undone.
69Chapter 9 | ServiceNIBE™ F1145
To Next Page
Loading...
Need help?
General
