Nibe F205P - List of Components

25
F205P
For the Installer
List of components
List of components
1 Immersion heater - 3,0 kW
3 Resetting, temperature limiter (hidden)
5 Limiting valve, heating system
6
Thermostat and temperature limiter, immersion heater
7 Temperature limiter, compressor
8 Power switch with mode 0 - 1 - 2 - 3
9 Feeding terminal and clock thermostat
11 Terminal block for fan switch
16 Circulation pump
18 Pushbutton switch for circulation pump
19 Setting knob for limiting valve
20 Exhaust air connector
25 Pushbutton switch for hot water prioritising
26 Motor protection device for compressor
27 Compressor
28 Working capacitor for compressor
30 Indicator lamp "Compressor running/alarm"
31 Indicator lamp "Defrosting on/check filter"
32 Indicator lamp "Immersion heater on"
33 High pressure pressostat
34 Microprocessor board with power pack
35 Capacity setting, circulation pump
36 Exhaust air fan
41 Low pressure pressostat
42 Boiler pressure gauge
43 Boiler thermometer
44 Shutoff valve, pump and supply heating system
47 Safety valve, water heater
48 Expansion valve
50 Shutoff valve, return line heating system
51 Drain valve, heating system
52 Safety valve, heating system
53 Vacuum valve (hidden)
58 Tension load stop for feeding conductor
59 Tension load stop for room thermostat conductor
62 Evaporator
63 Air filter
65 Filter drier
66 Type plate
69 Compressor heater
Connection Setting-out dimensions
A B C
70 Flow line, heating system ............................................................ Compression ring Ø 22 mm ...105 ....... 465 ........ 90
71 Return line, heating system ......................................................... Compression ring Ø 22 mm ... 130 ....... 465 ....... 190
73 Cold water connection ................................................................ Compression ring Ø 22 mm ... 180 ....... 465 ....... 290
74 Hot water outlet from water heater ............................................ Compression ring Ø 22 mm ... 295 ....... 465 ....... 345
77 Side access panel to valve connections
78 Filter box (hidden)
80 Drain connection, heating system ............................................... R 15 utv
82 Room thermostat (accessory)
84 Ventilation opening
85 Expansion vessel
86 Temperature sensor from evaporator
88 Temperature sensor from immersion heater & hot water prioritising
90 Ventilation connection for exhaust air ......................................... Ø 125 mm .......................... 2095 ....... 295 ....... 160
91 Ventilation connection for vented air ........................................... Ø 125 mm .......................... 2095 ....... 295 ....... 485
94 Temperature sensor for working compressor
95 Overflow pipe, safety valve water heater
96 Overflow pipe from heating system safety valve
97 Condensate drain from fan box
98 Overflow water discharge ........................................................... PVC-pipe, 32 mm outer diameter
99 Collecting funnel, waste water
103 Serial number sign
104 Temperature and pressure valve
107 Expansion vessel, tap water
108 Tundish from safety valve
109 Tundish from pressure valve
148 Pressure reduction valve
149 Connection for flexible hose to CW-side
150 Connection for flexible hose to heating-side
151 Filling valve, heating system cw-side