Nibe F205P - Front Panel, Supplied Clock Thermostat; Front Panels Functions

5
F205P
For Home Owners
Front panel, clock thermostat
Front panel, supplied clock thermostat
On/Off
Press “
” once to switch off the thermostat, press
again to restart.
A
Operating mode
The operating mode that the heat pump is to use is
selected here.
Auto
M
: In this mode the heat pump operates ac-
cording to your own settings. You set which temper-
ature you want indoors during day and night.
Day
M
: In this mode you get the setting for day
temperature for the entire day.
Night
M
: In this mode you get the setting for night
temperature for the entire day.
Manual: (no symbol) In this mode the set tempera-
tures are not used. Press
M
or
M
to increase or
decrease the temperature indoors.
B
Front panel’s functions
Display
First row: Week day.
Second row: Operating mode day
M
, operating
mode auto
M
, heating on
M
.
Third row: Actual indoor temperature (RT) or set in-
door temperature (SET), clock
Fourth row: Actual fan speed, operating mode
night
M
.
Timer
Set current time and date here.
Increase/decrease
These buttons are used to increase or decrease a
value.
D
C
F
E
The indoor temperature is regulated using a room thermostat. When the temperature in the accommodation is the same as
the temperature set on the room thermostat, the circulation pump in the heat pump stops.
To set different intervals with a temperature change, we recommend the supplied clock thermostat. For instructions on how
to set times and temperatures, see section "Settings".
M
Increase/decrease
Fan speed
On/Off
Operating mode
Timer
Display
F
E
D
C
B
A
First row
Second row
Third row
Fourth row
Fan speed
Select the fan speed here: high
M
, normal
M
and
auto (no symbol).
If normal
M
or high
M
is selected, you return to
the previous setting after one hour.
If normal
M
or auto is selected, the fan runs at low
speed when the compressor has stopped and rotates
up to speed when the compressor is in operation.