Nibe F2120 - 1 Important Information; Document Information; Safety Information

Document information
This technical manual is a complement to the Installer
handbook for F2120, containing:
■
Description of functions and component description.
■
Information to facilitate fault-tracing.
■
Instructions for replacing components.
■
Supplementary technical information.
The document applies to F2120 with software versions
up to and including 473.
The heat pump software version can be found in the info
menu on the indoor module/control module (menu 3.1).
Safety information
Symbols
NOTE
This symbol indicates danger to person or ma-
chine .
Caution
This symbol indicates important information
about what you should observe when maintain-
ing your installation.
TIP
This symbol indicates tips on how to facilitate
using the product.
Marking
The CE mark is obligatory for most products sold
in the EU, regardless of where they are made.
CE
Classification of enclosure of electro-technical
equipment.
IP24
Danger to person or machine.
!
Read the Installer Manual.
Serial number
The serial number can be found at the top left on the
rear cover and at the bottom on the side.
F2120
Serial number
Caution
You need the product's (14 digit) serial number
for servicing and support.
3Chapter 1 | Important informationF2120
1 Important information