Maintenance of F730
F730 can be installed separately or as one unit. The images in this
manual show F730 installed as one unit.
REGULAR CHECKS
NOTE
Service and maintenance may only be carried out by competent
and qualified personnel, such as NIBE service engineers or
other qualified specialists.
Your heat pump requires minimal maintenance after commissioning.
However, it is recommended that your installation is checked and ser-
viced annually by qualified personnel. This is to ensure the continued
efficient operation of your heat pump, and that the warranty remains
valid during the warranty period.
If something unusual occurs, messages about the malfunction appear
in the display in the form of different alarm texts. See alarm management
on page 72.
Service hatch
The vent valves etc. are behind the service hatch. Remove the hatch by
pulling it towards you.
NIBE F730Chapter 2 | The heat pump – the heart of the house22
To Next Page
Loading...
