Get information
OVERVIEW
Sub-menus
service info
INFO 3
compressor info
add. heat info
alarm log
off
runs
indoor temp. log
For the menu INFO there are several
sub-menus. No settings can be made
in these menus, they just display in-
formation. Status information for the
relevant menu can be found on the
display to the right of the menus.
service info shows temperature
levels and settings in the installation.
compressor info shows operating
times, number of starts etc for the compressor in the heat pump.
add. heat info displays information about the additional heat's operating
times etc.
alarm log displays the latest alarm and information about the heat pump
when the alarm occurred.
indoor temp. log the average temperature indoors week by week during
the past year.
SERVICE INFO
Menu
3.1
Information about the heat pump’s actual operating status (e.g. current temper-
atures etc.) can be obtained here. No changes can be made.
The information is on several pages. Turn the control knob to scroll between
the pages.
53Chapter 3 | F730 – at your serviceNIBE F730
To Next Page
Loading...
