F730 – An excellent choice
F730 is part of a new generation of heat pumps, which have been intro-
duced to supply your home with inexpensive and environmentally friendly
heating. Heat production is safe and economical with integrated hot
water heater, immersion heater, circulation pump and control system.
The heat pump can be connected to an optional low temperature heat
distribution system. e.g. radiators, convectors or underfloor heating. It
is also prepared for connection to several different accessories, for ex-
ample climate systems with different temperatures.
F730 is equipped with a control computer for good comfort, good eco-
nomy and safe operation. Clear information about status, operation time
and all temperatures in the heat pump are shown on the large and easy
to read display. This means, for example, that external unit thermometers
are not necessary.
EXCELLENT PROPERTIES FOR F730:
•
Inverter controlled compressor
The heat pump has an inverter-controlled compressor that automatically
adapts itself optimally and economically to your house and supplies
your installation with heating and hot water.
•
Scheduling the indoor comfort and hot water
Heating and hot water as well as ventilation, can be scheduled for each
day of the week or for longer periods (vacation).
•
Display with user instructions
The heat pump has a large display with easy-to-understand menus that
facilitate setting a comfortable climate.
•
Simple troubleshooting
In the event of a fault, the heat pump display shows what happened
and the actions to be taken.
9Chapter 1 | Important informationNIBE F730
To Next Page
Loading...
