Nibe F730 - Page 38

TIP
Set the stop time earlier than the start time so that the period extends
beyond midnight. Scheduling then stops at the set stop time the day
after.
Scheduling always starts on the date that the start time is set for.
Caution
A significant change over a longer period of time may cause poor indoor
environment and worse operating economy.
ADVANCED
advanced 1.9
heating curve
external adjustment
min. flow line temp.
room sensor settings
fan return time
own curve
Menu advanced has orange text and is
intended for the advanced user. This menu
has several sub-menus.
heating curve Setting the heating curve
slope.
external adjustment Setting the heat
curve offset when the external contact is
connected.
min. flow line temp. Setting minimum
permitted flow line temperature.
Menu
1.9
room sensor settings Settings regarding the room sensor.
fan return time Fan return time settings in the event of temporary ventilation
speed change.
own curve Setting own heat curve.
point offset Setting the offset of the heating curve at a specific outdoor temper-
ature.
night cooling Setting night cooling.
NIBE F730Chapter 3 | F730 – at your service38