SOLAR ELECTRICITY
affect hot water
SOLAR ELECTRICITY 4.1.10
affect room temperature
external energy meter
prioritise domestic electricity
X22
affect room temperature
Setting range: on/off
Factory setting: off
affect hot water
Setting range: on/off
Factory setting: off
3-phase (EME 10)
Setting range: on/off
Factory setting: off
prioritise domestic electricity (EME 20)
Setting range: on/off
Factory setting: off
This is where you set that part of your installation (room temperature, hot water
temperature) that will benefit from the surplus solar electricity.
When the solar panels produce more electricity than F730 requires, the temper-
ature in the property is adjusted and/or the temperature of the hot water is in-
creased.
EME
In this menu you can also make settings that are specific for your EME.
For EME 10, you enter if it is connected as 3-phase.
For EME 20, you can select whether you want domestic electricity to be priorit-
ised ahead of room temperature and hot water, provided that F730 is equipped
with an external energy meter.
Menu
4.1.10
63Chapter 3 | F730 – at your serviceNIBE F730
To Next Page
Loading...
