LANGUAGE
Choose the language that you want the
information to be displayed in here.
Menu
4.6
HOLIDAY SETTING
holiday setting4.7
activated
start date
stop date
heating
hot water
ventilation
0
normal
economy
To reduce energy consumption during a
holiday you can schedule a reduction in
heating, ventilation and hot water temper-
ature.
If a room sensor is installed and activated,
the desired room temperature (°C) is set
during the time period. This setting applies
to all climate systems with room sensors.
If a room sensor is not activated, the de-
sired offset of the heating curve is set.
One step is usually enough to change the room temperature by one degree, but
in some cases several steps may be required. This setting applies to all climate
systems without room sensors.
Menu
4.7
Vacation scheduling starts at 00:00 on the start date and stops at 23:59 on the
stop date.
TIP
Complete holiday setting about a day before your return so that room
temperature and hot water have time to regain usual levels.
TIP
Set the vacation setting in advance and activate just before departure
in order to maintain the comfort.
NIBE F730Chapter 3 | F730 – at your service66
To Next Page
Loading...
