Nibe OPT 10 - Page 12

F1145/1155/F1245/1255/F1345
GBM 10-15 is installed on the heating system. If necessary, EM1-BT25 is installed after GBM10-15. BT63 measures
the supply temperature out to the heating system.
-QM32
-FL3
-QM42
-QM12
-CM2
-HQ1
-QM34
-XL15
-BT1
-EB100
-FL2
-CM1
-BT25
-QM31
-QM31
-EP12
-EM1
-EB100
-AA25
-RM1
VVM 225/310/320/325/500
GBM 10-15 is connected to the supply line, between the indoor module and the air-water heat pump. Install the
shut-off valves outside GBM 10-15 to facilitate any future servicing.
-FL2
-CM1
-EB101
-XL2
-XL1
-QM1
-FL10
-QM40
-QZ2
-AA25
-EM1
-RM1
OPT 10 | GB12