English
Important information
NOTE
This symbol indicates danger to person or ma-
chine .
Caution
This symbol indicates important information
about what you should observe when maintain-
ing your installation.
General
OPT 10 is used to enable connection and control of gas
boiler NIBE GBM 10-15.
Contents
Unit box1 x
Cable ties2 x
Heating pipe paste1 x
Insulation tape1 x
Aluminium tape1 x
Temperature sensor1 x
Component positions
Electrical components
Terminal block, power supplyX1
Communication boardAA23
DIP switchAA23-S2
Pipe connections
Outline diagram
Explanation
Heat pump systemEB100
Connection, filling brineXL15
External addition (GBM)EM1
Shut-off valve, heating medium sideQM33, QM34
Non-return valveRM2
Heat pump systemEB101
Temperature sensor, condenser supply lineBT12
Temperature sensor, returnBT3
Shut-off valve, heating medium sideQM31, QM32
Circulation pump, charge pumpGP12
Particle filterHQ1
Oil/gas boilerEM1
Shut-off valveQM43
Filterball, particle filterQZ2
Connection, supplyXL1
Connection, returnXL2
Miscel-
laneous
Level vessel, collector sideCM2
Collector/borehole, brine sideEP12
Safety valve, brineFL3
Filler valveQM12
Shut off valve, brine returnQM34
Safety valve, heating medium sideFL2
Expansion vessel, heating medium sideCM1
Temperature sensor, room sensorBT50
Temperature sensor, additional heatAA25- BT63
Temperature sensor, outdoorBT1
Temperature sensor, hot water chargingAA25-BT6
Temperature sensor, hot water topAA25-BT7
Unit boxAA25
Reversing valve, hot waterAA25-QN10
Safety valve, heating medium sideFL10
Shut-off valveQM40
Tapping valveQM1
Shut-off valveQM42
Non-return valveRM1
Non-return valveRM3
Water heaterCP1
Control valveCP1-RN10
11OPT 10 | GB
To Next Page
Loading...
