MENU 4.6 -SMART ENERGY SOURCE™
NOTE
Smart Energy Source™ requires external additional
heat.
Smart Energy Source™
Alternative: on/off
Control method
Setting options: Price per kWh / CO2
If Smart Energy Source™ is activated, S1156 prioritises
how/to what extent each docked energy source will be used.
Here, you can select whether the system will use the energy
source that is cheapest at the time or the one that is most
carbon dioxide neutral at the time.
Caution
Your choices in this menu affect menu 4.7 - "En-
ergy price".
MENU 4.7 - ENERGY PRICE
Here you can use tariff control for your additional heat.
Here you can choose whether the system is to exercise
control based on the spot price, tariff control or a set price.
The setting is made for each individual energy source. Spot
price can only be used if you have an hourly tariff agreement
with your electricity supplier.
Set the lower tariff periods. It is possible to set two different
date periods per year. Within these periods, it is possible to
set up to four different periods on weekdays (Monday to
Friday) or four different periods on weekends (Saturdays
and Sundays).
Caution
This menu is only visible if Smart Energy Source
is activated.
MENU 4.7.1 - VARIABLE ELECTRICITY PRICE
Here you can use tariff control for the electric additional
heat.
Set the lower tariff periods. It is possible to set two different
date periods per year. Within these periods, it is possible to
set up to four different periods on weekdays (Monday to
Friday) or four different periods on weekends (Saturdays
and Sundays).
MENU 4.8 - TIME AND DATE
Set time and date, display mode and time zone here.
TIP
Time and date are set automatically if connected
to myUplink. To obtain the correct time, the time
zone must be set.
MENU 4.9 - LANGUAGE
Choose the language that you want the information to be
displayed in here.
MENU 4.10 - COUNTRY
Here, you specify the country in which the product has been
installed. This allows access to country-specific settings in
your product.
Language settings can be made regardless of this selection.
NOTE
This option locks after 24 hours, restart of display
or program updating. Afterwards, it is not possible
to change the country selected in this menu
without first replacing components in the product.
MENU 4.11 - TOOLS
Here, you can find tools for use.
MENU 4.11.1 - INSTALLER DETAILS
The installer's name and telephone number are entered in
this menu.
Afterwards, the details are visible in the home screen,
"Product overview".
MENU 4.11.2 - SOUND WHENPRESSING BUTTON
Alternative: on/off
Here you choose if you want to hear a sound when you press
buttons on the display.
MENU 4.11.4 - HOME SCREEN
Alternative: on/off
Here, you choose which home screens you want to be dis-
played.
The number of options in this menu varies depending on
which products and accessories are installed.
MENU 4.11.6 - DEFROST COLLECTOR
Alternative: on/off
Here, you can choose to activate defrosting of the collector.
The compressor is then blocked.
The function is active for 30 minutes or switched off when
the temperature sensor, condenser supply (BT12) becomes
too cold.
NIBE S1156Chapter 9 | Control - Menus50
To Next Page
Loading...
