heating
Increases or decreases in the accommodation temperature can be sched-
uled here for up to three time periods per day. One step is usually enough
to change the room temperature by one degree, but in some cases several
steps may be required.
Menu
1.3.1
If a room sensor is installed and activated, the desired room temperature
(°C) is set during the time periods.
Schedule: The schedule to be changed is selected here.
Activated: Scheduling for the selected period is activated here. Set times
are not affected at deactivation.
25NIBE™ SMO 20Chapter 3 | SMO 20 – at your service
To Next Page
Loading...
