Nibe SMO S40 - Additional Heat Only Mode; Emergency Mode Operation

Add. heat only
If you are unsuccessful in rectifying the fault and are
unable to heat the house, you can, whilst waiting for
assistance, continue running the heat pump in emer-
gency mode or "Additional heat only" mode. "Additional
heat only" mode means that additional heat only is used
to heat the house.
SET THE INSTALLATION TO ADDITIONAL
HEAT MODE
1.
Go to menu 4.1 "Operating mode".
2.
Select "Additional heat only".
EMERGENCY MODE
You can activate the emergency mode both when
SMO S40 is running and when it is switched off.
To activate when SMO S40 is running: press and hold
the on/off button for 2 seconds and select "emergency
mode" from the shutdown menu.
To activate when SMO S40 is switched off: press and
hold the on/off button for 5 seconds. (Deactivate the
emergency mode by pressing once.)
15Chapter 6 | Disturbances in comfortNIBE SMO S40