15VEDEX 4000
Start-up and ring
1. To start the boiler, press the power button.
2. The boiler controller turns ON automatically when
the power is turned ON.
3. In order to start the boiler, touch the
symbol on
the touchscreen and then move the slider respon-
sible for turning the boiler ON/OFF.
4. Place the fuel in the loading chamber, in accord-
ance with the recommendations in section 1 of
the Firing Instructions (see Chapter 6 Burning
Wood)
5. To start the ring process, enter the BURNER sub-
menu. After selecting the
symbol, FIRING UP
status is displayed on the control panel display.
6. Set re to the newspapers stacked on the wood
according to section 2 of the Lighting Instruc-
tions (see Chapter 6 Wood ring)
7. After completion of the FIRING UP procedure,
the boiler switches to the GLOWING and then
MODULATION statuses
To Next Page
Loading...
