Nibe VVM 300 - Page 38

36 NIBE VVM 300
Miscellaneous
4.0 Outdoor temp.
Menu 4.1 Outdoor avg. temp.
The average outdoor temperature over the last 24 hours.
Menu 4.2 Return
Return to menu 4.0.
Menu 5.2 Heat pump op. mode #
The operating status of the heat pump is shown here, al-
ternatively which alarm has been activated (corresponds to
channel S1 in the heat pump). In the event of an alarm the
heat pump can be restarted using the enter button.
Menu 5.3 Heat pump status #
Displays compressor status for the heat pump (corresponds
to channel S2 in the heat pump).
”Waiting” means that the compressor starts as soon as the
time conditions in the heat pump permits.
“Stopped” means the compressor is at a stand still.
”Compr. on” means that the compressor is running.
Menu 5.4 Minutes to start #
Time until compressor start in FIGHTER 2020 is shown in
this menu.
Menu 5.6 Starts count B #
The accumulated number of starts with the compressor in
FIGHTER 2020 is shown here.
Menu 5.8 Acc. run time B #
The accumulated time that the compressor has been in
operation in FIGHTER 2020 is shown here.
5.0 Heat pump
Menu explanation