alarm log
DODUP ORJ
To facilitate fault-finding the installa-
tion's operating status at alarm alerts
is stored here. You can see informa-
tion for the 10 most recent alarms.
To view the run status in the event of
an alarm, mark the alarm and press
the OK button.
DODUP ORJ
RXWGRRU WHPS
FRQGHQVHU UHWXUQ
FRQGHQVHU RXW
DGGLWLRQ
KRW ZDWHU FKDUJLQJ
KHDW PHGLXP IORZ
HYDSRUDWRU
RSHUDWLQJ WLPH
RS PRGH
Information about an alarm.
Menu
3.4
indoor temp. log
ZHHN
LQGRRU WHPS r&
LQGRRU WHPS ORJ
Here you can see the average temper-
ature indoors week by week during
the past year. The dotted line indicates
the annual average temperature.
The average outdoor temperature is
only shown if a room temperature
sensor/room unit is installed.
To read off an average temperature
1.
Turn the control knob so that the
ring on the shaft with the week
number is marked.
2.
Press the OK button.
3.
Follow the grey line up to the graph and out to the left to read off the
average indoor temperature at the selected week.
4.
You can now select to take read outs for different weeks by turning
the control knob to the right or left and read off the average temper-
ature.
5.
Press the OK or Back button to exit read off mode.
Menu
3.5
NIBE™ VVM 310Chapter 3 | VVM 310 – at your service42
To Next Page
Loading...
