Nice Fan4-Control

9
ASSOCIATION GROUP
Table A4 Association group
AG Identifier
Max
Node ID
Command Class Trigger Situation
0x01 1
COMMAND_CLASS_SENSOR_MULTILEVEL_
VS, SENSOR_M U LTI LEVEL_REPORT _ VS
The change between detected temperature and last reported
temperature is greater than the value set by parameter 2.
COMMAND_CLASS_THERMOSTAT_MODE_
V2, THERMOSTAT_MODE_REPORT
Device Mode changes
COMMAND_CLASS_THERMOSTAT_OPER-
ATING_STATE, THERMOSTAT_OPERATING_
STATE_REPORT
Device Status changes
COMMAND_CLASS_THERMOSTAT_SET-
POINT_V2, THERMOSTAT _SETPOINT _RE-
PORT_ V2
Set point value changes
COMMAND_CLASS_THERMOSTAT_FAN_
MODE, THERMOSTAT_FAN_MODE_REPORT
Fan mocie changes
COMMAND_CLASS_THERMOSTAT_FAN_
STATE, THERMOSTAT_FAN_STATE_REPORT
Fan status changes
COMMAND_CLASS_DEVICE_RESET_LO-
CALLY, DEVICE _RESET_ LOCALLY _ NOTI
FICATION
Restore the factory setting
Table A5 Association group
AG
Identifier
Max
Node ID
Command Class Trigger Situation
0x01 1
COMMAND_CLASS_THERMOSTAT_ SETPOINT_
V2,THERMOSTAT _ SETPOINT_REPORT _V2
Set point value changes
COMMAND_CLASS_THERMOSTAT_ FAN_
MODE,THERMOSTAT_FAN_ MODE_REPORT
Fan mode changes
COMMAND_CLASS_THERMOSTAT_ FAN_
STATE,THERMOSTAT_FAN_ STATE_REPORT
Fan status changes
COMMAND_CLASS_DEVICE_RESET_
LOCALLY,DEVICE_RESET_LOCALLY_ NOTIFICATION
Restore the factory setting