Nice Fan4-Control - Supported Z-Wave Command Classes

10
SUPPORTED Z-WAVE COMMAND CLASSES
Table A6 Command Class supported by the device
S2 Support
COMMAND_CLASS_VERSION,
COMMAND_CLASS_POWERLEVEL,
COMMAND_CLASS_THERMOSTAT_SETPOINT,
COMMAND_CLASS_THERMOSTAT_FAN_MODE,
COMMAND_CLASS_ASSOCIATION_V2,
COMMAND_CLASS_FIRMWARE_UPDATE_MD_VS
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_BATTERY,
COMMAND CLASS_ TH ERMOSTAT MODE,
COMMAND CLASS_ TH ERMOSTAT FAN STATE,
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V2,
COMMAND_CLASS_DEVICE_RESET_LOCALLY,
COMMAND_CLASS_SENSOR_MULTILEVEL_VS,
COMMAND_CLASS_THERMOSTAT_OPERATING_STATE,
COMMAND_CLASS_CONFIGURATION,
COMMAND_CLASS_ASSOCIATION_GRP INFO,
S2 No Support
COMMAND_CLASS_ZWAVEPLUS_INFO,
COMMAND_CLASS_SUPERVISION
COMMAND_CLASS_TRANSPORT_SERVICE_V2,
COMMAND_CLASS_SECURITY_2,