Nice Infinity Shock G2 - Technical Characteristics

To Next Page

To Previous Page

ENGLISH_

Product for industrial use:

•Supply voltage: 127 Vac / 220 Vac (check connection – power grid)

• Nominal frequency: 50/60 Hz (check your product version)

• Max consumption: 12 watts

• Charger output: 13.8 Vdc

• Recommended battery: 12V/7Ah Sealed - Never use unchargeable

batteries

• Siren output: Max of two 115dB piezoelectric sirens (max 250mA each)

• Pulse voltage with an automatic setting in up to 22,000 volts

• Supports up to 10,000 meters of linear wires

• Output discharge: 22,000 Volts /5 Joules

• Luminous indication of the supply modes: in Grid and Battery

• Luminous indication of the safety modes: Fence, Zone, Pulse.

• 12Vdc/0.5A auxiliary supply output

• Discharge intervals: 1.5 seconds

• Pulse duration: 450µs.

• 3 sensibility settings and 3-time settings for the Siren.

Auxiliary connections:

• Input for a wired sensor (S1 and Negative “-”).

• Input for the enable/disable key (TC and Negative “-”).

• Output for enabled fence signal (12Vdc/100mA - ED and Negative “-”).

• Auxiliary relay to indicate triggering (NA) and (NF).

TECHNICAL CHARACTERISTICS