Nice Infinity Shock G2 - Setting up - Siren Time; Setting up the Remote Control

_ENGLISH
50
EN
SETTING UP THE REMOTE CONTROL
SETTING UP - SIREN TIME
9
10
In order to set the remote control, follow the steps below:
1) Press the CH PROG key once;
2) The LED PROG lights up and the siren generates 1 beep;
3) Press for 1 second the control button that you wish to set;
4) The LED PROG ashes, indicating success in registering the pressed
button. pressionado.
* To set new controls, repeat the steps above.
Reseting the Controls
Press for 7 seconds until the LED PROG stops ashing, the electrier will
delete all remote controls settings.
Locate the TEMPO DE SIRENE jumper and position it according to the
desired conguration. The instructions are also registered on the product
board.
Setting for 15
seconds
Setting for 2
minutes
Setting for 5
minutes