Nice Infinity Shock G2 - Page 59

ENGLISH_
59
EN
- This equipment should only be installed by a specialized
technician.
- ABefore performing maintenance services or inspections on the system,
turn-off the power grid and the product’s battery.
- Never install this equipment on structures that propagate ames, due to
the risk of shorting on the cables or product.
- When in doubt, always contact our support department.
- The supply cable should be connected to the power grid through a plug
accessible to the user, so he may turn-off the electricity at any time.
- If any cable or supply cable is broken or damaged, it should be replaced
by the qualied installer or professional, in order to prevent risks.
- BATTERY: In order to install or replace the central’s battery, it is
mandatory that the shock is disabled by the magnetic key, remote control
or the keyboard port. Also, turn-off the breaker or similar device installed
to disable the central’s power grid. Only after ensuring that the central
is totally inactive and powered down, open the central’s cover. Install or
replace the battery, closing the cover
once again when nished. If the cover is again closed and locked, the
power grid can be turned on again.
- Never use battery cables to test the high voltage output spark!