1 - English
EN
1
PRODUCT DESCRIPTION
OXIBD (OXIBD/A) is a radio receiver designed for being installed on a control unit for automating gates, garage
doors and road barriers.
– All uses other than the intended use described and use in environmental conditions other than
those described in this manual should be considered improper and forbidden!
• One-way and two-way radio communication
In one-way radio communication, the two devices involved (equipped with one-way radio technology) have
a clearly dened and unambiguous role within the system: there is a transmitter that simply transmits and a
receiver that only receives without any further role. The radio communication, therefore, is one-way.
Instead in two-way communication, the two devices (equipped with two-way radio technology) play a different
role each time within the system, as each one is capable of receiving and transmitting information from/to an-
other device. Therefore, even the transmitters can turn into “receivers” of information coming from the receiver
mounted in the control unit.
The OXIBD (OXIBD/A) receiver has both the radio technologies, thus it can interface with both one-way and
two-way transmitters.
Throughout this manual, “two-way” refers to the “two-way technology” of receiver-transmitter radio devices,
while the term “BD” denotes a specic radio encoding protocol adopted by OXIBD (OXIBD/A) and by transmit-
ters featuring this encoding protocol.
“BD” encoding, unlike the other one-way encoding systems compatible with OXIBD (OXIBD/A) (see further
below), offers the following additional functions:
ENGLISH
Instructions translated from Italian
To Next Page
Loading...
Need help?
General
