Nice OXIBD

EN
English - 22
5 Z =
During the deletion procedure, indicates that the code has been deleted
5 Z =
“Certicate” with lower priority than the admissible level
6 Z =
Code synchronisation failure
Longashes>RED
1 Z =
Non-original code block
2 Z =
Code with lower priority than the authorised level
Shortashes>RED
1 Z =
“In vicinity” programming block
1 Z =
“Certicate” memorisation block
2 Z =
Memory block (PIN entry)
Longashes>ORANGE
1 Z =
(on start-up, after a few green ashes) indicates the presence of two-way transmitters
Shortashes>ORANGE
2 Z =
Indicates activation of block programming (on start-up)