Nice planotime User Manual

15
G
1. Press key ■ repeatedly a number of times until Auto starts flashing
2. Press key 3 times to select the Prog “programming” mode
▼
3. Press key to confirm the “programming” mode
▼
4. Press key to confirm the programming of “events”
▼
5. Press key to confirm the programming of a “new event” NEW
▼
6. Press key or to set the hours (in the example: 18 )
▼
▼
7. Press key to confirm the hours
▼
8. Press key or to set the minutes (in the example: 45 )
▼
▼
9. Press key to confirm the minutes
▼
10. Press key or to choose the first day of the week
(in the example: We=Wednesday)
▼
▼
11. Press key to select the first day of the week
▼
12. Press key or to choose the second day of the week
(in the example: Fr=Friday )
▼
▼
13. Press key to select the second day of the week
▼
28. Press key to confirm the event
(in the example: no special “holiday” command)
▼
29. Press key to select the special “planetary time” command
▼
33. Press key to confirm the event
(in the example: special “timed” command)
▼
34. Now all the parts of the selected event start flashing to indicate that the
programming of the new event has been completed.
Press key to confirm the event or press key ■ to go back to an earlier stage.
▼
With the last confirmation the event is memorized and PLANOTIME is ready for programming another new event; you
can proceed starting from step N. 5 in this table.
Note: for proper operation of the “planetary time” function, the relevant parameters must be set (see table 30)
... Auto
15. Press key to select the third day of the week
▼
17. Press key to select group 2
▼
19. Press key twice to select group 4
▼
31. Press key to select the special “timed” command
▼
30. Press key to confirm the event
(in the example: special “planetary time” command)
▼
or
32. Press key or to adjust the timing (in the example: 20 seconds)
▼
▼
o
or
or
or
or
14. Press key
or
to choose the third day of the week
(in the example: Sa=Saturday)
▼
▼
16. Press key to confirm all the selected days
▼
18. Press key to choose the “Down” command for group 2
▼
20. Press key to choose the “Up” command for group 4
▼
22. Press key to choose the “Up” command for group 5
▼
24. Press key to choose the “Up” command for group 6
▼
26. Press key to select the special “ ” command
▼
25. Press key to confirm the commands
(in the example: “Down for group 2 and “Up” for groups 4,5 and 6)
▼
21. Press key to select group 5
▼
23. Press key to select group 6
▼
27. Press key to confirm the event
(in the example: send special “ ” command)
▼
Table 24 Programming a complete “new event” (example 2 in table N. 22): Example

Nice planotime Specifications

General

Brand	Nice
Model	planotime
Category	Remote Control
Language	English