CE declaration of conformity
Declaration in accordance with Directives: 2004/108/EC (EMC); 2006/42/EC (MD) annex II, part A;
89/106/CEE (CPD) procedure according to appendix III, ii, possibility 2 (System 3)
Note - The content of this declaration corresponds to the declaration made in the official document filed in the offices of Nice S.p.a., and particularly the lat-
est version thereof available prior to the printing of this manual. The text contained here has been adapted to meet editorial requirements.
A copy of the original declaration may be requested from Nice S.p.a. (TV) I
Declaration number: 407/SBAR Revision: 0 Language: EN
Name of manufacturer: NICE s.p.a.
Address: Via Pezza Alta 13, Rustignè Industrial Zone, 31046 Oderzo (TV) Italy
Person authorized to provide
technical documentation: Mr. Oscar Marchetto
Product type: Electromechanical barrier lift
Model: SBAR
Accessories: XBA7, XBA4, XBA13, XBA19
The undersigned Luigi Paro, as Managing Director, hereby declares under his own responsibility that the product identified above complies with the provisions
of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 15 2004 concerning alignment of Member States’ legislation
regarding electromagnetic compatibility and abrogating directive 89/336/EEC, according to the following harmonized standards:
EN 61000-6-2:2005, EN 61000-6-3:2007
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and amending directive 95/16/EC (consoli-
dated text)
Should the machinery be put into service in a European country with an official language different from the one of this declaration, the importer must attach the translation of this
document to the declaration.
• Directive 89/106/EEC of the European Council of 21 December 1988 regarding the approximation of legislation, regulations and administration of Member
States concerning construction products, according to the following harmonised standards: EN 13241-1:2003
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003, EN 60335-2-103:2003
Oderzo, June 30 2011 Mr. Luigi Paro (Managing Director)
Essential requirements for CE marking for Directive 89/106/EEC
Characteristics Certifying Authority Document
Release of hazardous substances CERT(CPD no. 1600) prot. no. 246-03/AC/lz
Resistance to wind load CERT(CPD no. 1600) 1157/08
Safe opening for vertically moving doors CERT(CPD no. 1600) 1159/08
Mechanical strength and stability - - - 167TCF08 SP S14
Manoeuvring forces for power-operated doors/gates CERT(CPD n°1600) 1158/08
(*) CERT of Treviso Tecnologia in Lancenigo di Villorba (TV)
EN
16 – English
Box N° 1
The installation of the product: SBAR Road Barrier matricola N° serial N° (see label): .........................................................................................................
Complete with pole: XBA4 and following accessories: ..........................................................................................................................................................
Was performed by:
Company: ................................................................................................. Address: ........................................................................................................
Name and Surname of responsible installer: ........................................................................................................................................................................
The installer hereby declares to have strictly observed all provisions of the instruction manual enclosed with the product:
Data ....................................................... Signature: ........................................................................
Place of product installation, at: .................................................................. Address: ........................................................................................................
Caution! – This declaration of conformity is not to be considered valid if all fields in this box are not duly compiled.
APPENDIX I
To be used only in the case of installations in conformity with chapter 1 and more specifically paragraph 1.3.1
To be detached, compile box N°1 and deliver to automation owner together with the operation manual and maintenance schedule
To Next Page
Loading...
