English – 17
EN
12
PRODUCT DISPOSAL
This product constitutes an integral part of the automation and, therefore, must be disposed of together with it.
Similarlytotheinstallationphase,oncetheproductreachestheendofitsusefullife,thedisassemblyandscrappingoperationsmustbeperformedbyqualied
personnel.
This product is made of various types of materials, some of which can be recycled while others must be scrapped. Seek information on the recycling and disposal
systems envisaged by local regulations in your area for this product category.
CAUTION! – Some parts of the product may contain polluting or hazardous substances which, if released into the environment, constitute serious environmental
and health risks.
As indicated by the adjacent symbol, the product may not be disposed of together with domestic waste. Sort the materials for disposal, acco
ding to the methods envisaged by current legislation in your area, or return the product to the retailer when purchasing an equivalent product.
CAUTION!–Locallegislationmayincludetheapplicationofheavynesintheeventofimproperdisposalofthisproduct.
13
TECHNICAL SPECIFICATIONS
WARNINGS: • Alltechnicalspecicationsstatedhereinrefertoanambienttemperatureof20°C(±5°C).•NiceS.p.A.reservestherighttoapplymodications
to products at any time when deemed necessary, maintaining the same intended use and functionality.
Type Electromechanical self-braking gear motor for the automatic movement of sliding gates for industrial use,
completewithelectroniccontrolunitDPRO500
Pinion Z=18;Module=6;Pitch=18.8
Peak thrust 216Nm
Nominal torque 65Nm
Nominal torque speed 0.16m/s(9,50m/min)
Operating limits TUB4000isgenerallycapableofautomatinggatesupto4000Kginweightand30minlength.
Power supply 3~400Vac+/-10%;50Hz.
Max. absorbed power 580W
Nominal absorption 1,6A
Insulation class 1 (a safety earthing system is required)
Operating temperature -20°C...55°C
Protection level IP 54
Dimensions (mm) 580x480x240
Weight 60kg