CAUTION
● Once assembled on the compressor, do not hold the Inverter to lift or
transport the compressor.
Maximum and minimum specified torque must be met. The screwing torque
must be verified at least once per batch.
NOTICE
● The provision for compressor earth connection can be made through the
earth connector provided by CF01F and CF02F Inverters. To ensure the
connection's low resistance, consider performing the test described on EN
60335-1 Ed5 clause 27.5 in the final appliance.
3.5. Package information
The number of Inverters inside the packing box may change due to internal or external
requirements. Figure 16 shows an example of the packing box, and it must be used only as a
reference.
Figure 16 – Example of carton box for inverter transportation
To Next Page
Loading...
