Nidec NE200-2S0015GB - Page 105

NE200/300 Series Drive User Manual
96 Chapter 5 List of Parameters
Code Description Setting range Default Modify
Modbus
Address
21: IDE Hall current
detection fault
22: ECE PG fault
23: LC fast current limit
fault
24: EF2 terminal close
fault
25: PIDE: PID feedback
offline
26: OLP2 Forewarning
of overload fault
27: InPE Initial position
fault detected of
synchronous moto
FF.01
Output freq.
at latest fault
0 ～ Frequency upper
limit
0.00Hz * 1001H
FF.02
Reference
frequency at
latest fault
0 ～ Frequency upper
limit
0.00Hz * 1002H
FF.03
Output
current at
latest fault
0 ～ 2 drive rated current 0.0A * 1003H
FF.04
Bus voltage
frequency at
latest fault
0 ～ 1000V 0V * 1004H
FF.05
Running
status at
latest fault
0: StP Stop 1: Acc
acceleration
0 * 1005H
2: dEc deceleration
3: con constant speed
FF.06
Fault history
1 (Last One)
The same as FF.00 NULL * 1006H
FF.07
Fault history
2
The same as FF.00 NULL * 1007H
FF.08
Total power
on time
0 ～ 65530h 0h * 1008H
FF.09
Total running
time
0
～ 65530h 0h * 1009H