Nidec TNP Series User Manual


3.2.4 Battery charge display (TNP only)
Display shows below screens depending on the battery condition.
ᵠᵟᵲᴾ
ᵬᶋᴾ
ᵪᵭᴾᵠᵟᵲᴾ
ᵬᶋᴾ
“BAT” is shown during recharging of
Nickel Metal Hydried battery; even
if Power is off.
Please charge battery with AC adapter.
“LO BAT” is shown when voltage of
Nickel-Metal Hydried battery is low.
㻌
㻌
㻌
4
㻻㼜㼑㼞㼍㼠㼕㼛㼚
4.1 Fundamental operation
Key name Opearation
Power Turn ON and OFF
Mode Change measuring mode
Zero/RST Zero set / Peak reset
Mem Store the peak data (TNP only)
Recall Display memory data (TNP only)
4.2 Special operation
Operation
key
Operation How to operate
Zero/RST
+
Power
Function mode
When Power is off, press Zero/RST key and hold, then
press Power key, then release
Keep pressing Zero/RST key until function setting
“F01”turns on
Mem
+
Power
Clear memory data
(TNP only)
When Power is off, press Mem key and hold, then press
Power key, then release
Keep pressing Mem key until “none” appears
㻠㻌

Nidec TNP Series Specifications

General

Brand	Nidec
Model	TNP Series
Category	Measuring Instruments
Language	English