1. Product features
ƔOpening and closing torque can be measured.
ƔData can be downloaded to PC with USB.
ƔPeak value (peak hold) can be measured.
ƔMemorize 1000 peak values at maximum with memory mode. (TNP only)
ƔDecision to pass or fail of the product by comparator function (judgement is informed by LED).
(TNP only)
ƔNickel Metal hydride battery enables to use TNP without AC adapter.
(TNJ operate with only AC adapter)
ƔRating torques
TNJ series 2N䡡m, 5N䡡m, 10N䡡m.
TNP series 0.5N䡡m, 2N䡡m, 5N䡡m, 10N䡡m.
ƔSelect the measuring units (Nm, Ncm, Kgcm, Lbin)
ƔSelectable measuring cycle (indication cycle); 1, 2, 4, 8 times / second
2. Accessories
1. Torque meter unit
Chuck pin
Chuck open/close knob
Operation panel
*This picture is TNP
Measruing table.
2. AC adaptor 3. Chuck pins (4pieces) 4. USB cable (TNP only)
5. Operation manual
㻝㻌
To Next Page
Loading...
